Filter Results By:
Products
Applications
Manufacturers
- Virginia Panel Corporation
product
Pneumatic, Contact, Receiver, Hose Barb, for 3/8" [9.5 mm] ID Tubing
610131104
Primary mating contact 610132104.Pneumatic Connectors are available with either ferruless polytube fittings (3/8" tubing OD) or hose barb (3/8" tubing ID). Ferrules fittings securely attach tubing without hose clamp - which is recommended for the hose barb type (hose clamp not included).
-
product
Pneumatic Contact, Receiver, Hose Barb, for 1/8" [3.2 mm] ID Tubing
610132105
Primary mating contact 610131106.Pneumatic Connectors are available with either ferruless polytube fittings (3/8" tubing OD) or hose barb (3/8" tubing ID). Ferrules fittings securely attach tubing without hose clamp - which is recommended for the hose barb type (hose clamp not included). The 1/8" ID connectors are available with hose barb.
-
product
Video and Audio Test Generator
PTG 5610
The P TG 5610 is a versatile multi-rate video and AES test generator which can generate video test signals in 525/625 plus HDTV formats. Provides 2 independent simultaneous video outputs with 4 channels of external AES plus 16 channels of embedded audio with user adjustable frequency, audio gain, and bit depth plus selectable momentary pause (silence) for left and right channels to assist with left and right channel ID.
-
product
Fixture ID, Cycles Counter Laser Sensor
AR313 & AR706
The AR313 module contains in its editable registers the fixture identification numbers, as well as the mechanical parameters of the product, allowing the safe automation of the set-up of the machine. It also has two counters for the test cycles carried out.
-
product
3/8" ID Contacts
VPC offers a range of pneumatic connectors that are ideal for use with automatic engagement interface systems. These pneumatic contacts also work well when used together with the VPC iDock Series.
-
product
Telephone Line Simulator
TLS-5
The TLS-5 Telephone Line Simulator offers the most convenient way to demonstrate or test telecom equipment where central office lines are not easily available. The TLS-5 functions as a virtual CO switch, providing four simulated central office lines with two talk paths, plus an audio interface port. Features include: 4 loop start lines, 2 talk paths, PBX features, programmable parameters, precise call progress tones, caller ID features, CLASS features, and programmable dial tones.
-
product
McMurdo FastFind 220 GPS PLB ( Personal Locator Beacon)
The FastFind 220 Personal Locator Beacon (PLB) uses advanced technology packed into a simple, lightweight, palm sized unit. Using the dedicated 406 MHz frequency, FastFind 220 transmits your unique ID and precise location to the global network of search and rescue satellites. The FastFind 220’s electronics design was upgraded in 2018, offering accelerated location detection with the duel GNSS capabilities — GPS & Galileo recivers. Within minutes rescuers are alerted to your situation, and receive regular position updates. Finally, emergency services can home in on your beacon’s 121.5 MHz transmission to find you. Explore the world with peace of mind. If you find yourself in a remote area without any other form of communication, activating your FastFind 220 will summon emergency assistance.
-
product
INNOTESTER
PK-160/160PL
INNOTESTER (PK-160/160PL) combines the function of a smart cable tester, network tester, port identifier and organizes with the capability to identify up to 100 cables run at a time, and 8 Test + ID remotes allows one person to test 8 cables runs up to 600 meters.
-
product
Unified Satellite Phone Monitoring System
Unified Satellite Phone Monitoring System is designed to intercept Voice, SMS and Text traffic from Satellite Phones operating on Thuraya, Iridium and IsatPhone Pro Satellite networks. The system is pre-integrated & pre-configured in a compact ruggedized transportable casing for plug and play operations. It intercepts the signals from L-band uplink (from Satellite Phones to Satellites) and downlink (from Satellite to Satellite Phones) to provide the duplex calls up to 15 Kms with LOS and beyond that simplex calls. System is equipped state-of-the-art high performance Thuraya and IsatPhone Pro decryption module , Iridium proprietary protocol module to provide processed intelligible output in the form of Voice, SMS and Text along with session related information such as Called Phone Number (for session initiated by Satellite Phone),Caller ID, TMSI/IMSI/IMEI and geo-location
-
product
Phase ID Systems
LED Meter Probe allows the user to take Real time Phase Angle readings along with AC nominal voltage readings. A PD800W LED Meter Probe works in conjunction with the Receive Unit to verify phase identification along with the actual phase angle data. This is all done without any calculations or data transfer from the field to a base computer. The meter probe and reference probe or receive unit can operate at 100 feet of separation and up to 300 feet line of sight separation. In the event that this distance would need to be greater, the Receive Unit can be unplugged from the charging cable and taken into the field while operating on it's rechargeable batteries for up to 8 hours at a time.
-
-
product
Thermal Analytics Security Camera
Elara™ FB-Series ID
The FLIR Elara™ FB-Series ID thermal security camera uses onboard analytics to classify human or vehicular intrusions, making it ideal for perimeter intrusion detection and sterile-zone monitoring. The Elara™ FB-Series ID can also hand off classified intrusions to FLIR PTZ cameras for autonomous tracking of intruders. Easy to set up, Elara™ FB-Series provide reliable detection with low false alarm rates in challenging environments, bad weather, and complete darkness.
-
product
Pneumatic, Module, Receiver, 5 Position (3/8" ID)
510104160
Pneumatic, Module, Receiver, 5 Position (3/8" ID)
-
product
RS-422/RS-485 Repeater
ND-6510
ADLINK's NuDAM data acquisition modules make up a total acquisition network and control system. Up to 256 NuDAM modules an be romotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host. Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network. The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.
-
product
FlashLink PDF Multi-Use Data Logger
This plug-and-play temperature logger comes pre-programmed and can be reused again and again. After each use, the data is downloaded to a USB enabled device as an encrypted PDF file with a unique identification number for record keeping and traceability. Once data is retrieved, simply reset the unit by pushing and holding both buttons till the data is cleared and a new trip ID is created. This makes it a cost-effective cold chain management and logistics solution for monitoring temperature-sensitive commodities during shipping and/or storage. The FlashLink PDF Multi-Use Data Logger is ideal for tracking products transported between facilities or as an economical replacement for reusable chart recorders. The logger has the ability to monitor environmental conditions in temperature controlled facilities, such as warehouses, distribution centers, processing, packaging or staging areas.
-
product
Refrigerant Identifier
Mini ID R-22
Neutronics Mini ID™ R-22 is an affordable, compact and hand-held R22 Refrigerant Identifier designed to protect your equipment and avoid contamination of your R-22 supply. This tool can be used on HVACR systems or on virgin cylinders to ‘PASS’ or ‘FAIL’ R-22 before recovery or use.
-
product
Satellite Signal Level Meter
Super Buddy 29
The Super Buddy 29 satellite meter has all of the great features of the standard Super Buddy satellite meter plus an internal combo 21 volt / 29 volt module to power the new DIRECTV SWM LNBs and the WildBlue / Telesat / Xplornet TRIAs! Be "sure of your bird" with the positive ID feature or use the automatic scan to identify the unknown satellite.
-
product
Production Caller ID Signal Simulator
AI-80
The AI-80 is a fully programmable stand alone Caller ID signal generator designed for production environments. It is capable of generating signals for all FSK and DTMF based Caller ID standards. Includes general telephone signal analysis features and a highly flexible programming language for sophisticated and complex production testing sequences.
-
product
cPCI IP Carrier Module With Front And Rear I/O
DP-cPCI-5211
DP-cPCI-5211 IP carrier board provides electrical and mechanical interface for four industry standard IP modules. The board provides full data access to the IP modules I/O, ID and memory spaces. The programmable registers are used for configuring and controlling the operation of IP modules.
-
product
Enclosure, 6 Module with 2 Cable Clamps
410112237
This aluminum enclosure is for the ITA Part # 410 104 118. It is an alternative to the ITA with removable cover. The cable clamps are 1" ID. ITA strain relief plates are not needed.
-
product
Refrigerant Analyzer
Ultima ID RI-2004HV
Neutronics Ultima ID RI-2004HV series utilizes non-dispersive infrared (NDIR) technology to determine the weight concentrations of R12, R134a, R22, hydrocarbons and air. Neutronics’ exclusive “Blend-ID” analytical software can also quickly and accurately indicate the presence of R410a blend refrigerant.
-
product
Remoteable ISR Collection Software Suite
Sceptre
remoteable ISR collection software suite that can act alone or as a network of receivers to perform rapid signal analysis for ID, tip and cue, c-uas, and interoperability for geolocation. It can be integrated with different, multiple simultaneous receivers on stationary or mobile collection platforms, and provides real-time analysis of COMINT, FISINT, and ELINT signals.
-
product
Test Phone - Technician LCD
CZ20025
The CZ20025 is packed with the features needed for PABX and internal phone systems. The LCD provides features such as Caller ID, Digit Grabbing, PABX pause, and voltage/current display. The buttinski is ADSL compatible, featuring both data lockout and override to prevent disruption of an ADSL service, and the ADSL/POTS filtering allows you to go off-hook on an ADSL line. The one way speaker allows hands free monitoring and the memory provides storage for commonly dialled numbers.
-
-
product
ASCA Pilot Program Participation
Compatible Electronics, Inc. is a testing laboratory participant under the United States Food and Drug Administration’s Accreditation Scheme for Conformity Assessment (FDA ASCA) pilot program. We are listed under ASCA ID# TL-80, TL-81 and TL-82.
-
product
RF Prototyping Kit
VXI-5501
* VXI-5501 has a Bare Copper-clad Prototyping Board for RF and microwave modules.* Includes a VXI-5524 Register Based Interface Board with 48 digital IO lines and a 16-bit VXI data bus.* User configurable model number, manufacturer ID, version and serial numbers identifies the module as from your company.* Includes a blank front panel, side shields, manual, layout aids and VXI-Kit hardware for a single slot wide C-size module.
-
product
Test Phone - Professional TS52 Pro
CZ20152
The CZ20153 is the latest design technology providing voice, data, and video technicians/engineers all the functionality essential in a test set. This model builds on the CZ20123 by adding features specifically useful for modern digital communications including Data Indication, Voltage/Current measurement, Caller ID with Call Waiting, and DTMF Digit Grabbing. All of these extra features are essential for working on modern phone systems. With these additional features you can determine whether data is on the line, whether the voltage is sufficient, whether the line current is sufficient, verify the Caller ID & Call Waiting, and isolate faulty customer premise equipment(CPE). Also included are the RainSafeTM, DropSafeTM, and DataSafeTM technologies making it truly rugged and robust backed up by a 3 year warranty.
-
product
32-CH Discrete Input Daughter Board Module
HSL-DI32-DB-N
*Slave ID consumption: 2 - N: for 32-CH NPN sinking type sensor inputs or dry contact*Photo couple isolation voltage: 2500Vrms*Input impedance: 4.7KΩ*Input current: ??10mA (Max), ??12.5mA (Peak)*Input voltage: ??40V (Max)
-
product
GemID
Gem ID is used to generate and identify the distinctive DNA, essentially the unique fingerprint of a diamond. Non-GIA diamonds when handed over to a broker can be registered in the database and once returned can be cross-checked with the database and verified if it’s the same diamond or not. The same goes with transferring the merchandise from one unit to the other.
-
product
Hand-Held Readouts & Dataloggers
HPM4000 (SR / ID)
The HPM4000 series is a highly versatile entry-level portable hydraulic data logger, ideal for pre-dispatch inspection, preventative maintenance and simple diagnostic fault-finding. There are two models, Sensor Recognition (SR) & Intelligent Digital (ID).
