Filter Results By:
Products
Applications
Manufacturers
- Optomistic Products
product
Sensors
Optomistic Products’ unique two-part solution fulfills almost every LED test requirement you may have. First, choose your pre-programmed Universal LightProbe Sensor from the range of sensors listed below. After you have chosen your sensor, you will choose a fiber-optic probe to customize the test for specific mechanical requirements and constraints.
-
product
Charge Coupled Device (CCD) Image Sensors for Space and Ground-Based Astronomy
(CCDs) for Space science, Ground-based Astronomy, and Earth observation applications with an impressive record of successful deliveries to a wide range of customers over 40 years.All Teledyne e2v devices can be supplied partially or fully customised to fit the application and achieve the best possible system performance. CCD image sensor design, manufacture, test and characterisation are carried out in-house enabling control from start to finish. Multi-polysilicon, multi-metal and back-illumination options are available for high resolution, high sensitivity and very low noise.
-
product
REM-11100, 2-, 3-, 4-Wire, 4-Channel Voltage Input Module for Remote I/O
784748-01
2-, 3-, 4-Wire, 4-Channel Voltage Input Module for Remote I/O - The REM‑11100 is a voltage input module for remote I/O. Remote I/O systems are low-cost, modular systems for simple machine control and measurements. A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the REM‑11100 from a real-time controller, such as a CompactRIO Controller or an Industrial Controller. You can use remote I/O hardware to add low-cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high-speed or specialty measurements. This module features 2‑, 3‑, and 4‑wire spring terminal connection methods, a built-in power supply for sensors, four selectable input ranges, and simultaneous sampling.
-
product
PXIe-6535, 32-Channel, 10 MHz, 40 MB/s PXI Digital I/O Module
780695-01
32-Channel, 10 MHz, 40 MB/s PXI Digital I/O Module—The PXIe‑6535 can continuously stream data over the PXI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.
-
-
product
Area Scan Camera
Genie Nano-CXP
Introducing Genie Nano-CXP, a camera designed for full-throttle performance. Genie Nano-CXP builds on Nano's proven, industry leading reputation and leverages a CoaXPress 6Gbps interface to deliver the maximum throughput from leading edge high resolution CMOS image sensors.
-
product
3D Image Processing Software
EyeVision
EyeVision is the base for numerous measurement and inspection tasks in image processing. Features are: Creation of inspection programs with drag and drop function. EyeVision supports all hardware platforms such as; Smart Cameras, Vision Sensors, PC & Embedded support.
-
product
GMSL3
FRAMOS is the first company in the market to integrate Analog Devices’s new GMSL3 technology into an embedded vision environment. GMSL3 can transmit high frame rates (4K, 90 fps) as far as 14 meters with unprecedented efficiency. This interface is well suited for applications where the MIPI CSI-2 (D-PHY) length restrictions are not sufficient, while at the same time, a highly durable cable with low power consumption and low cost are essential. Camera developers can use the flexible FRAMOS Sensor Module Ecosystem to validate a variety of image sensors in the lab and in the field while taking advantage of the interface’s features.
-
product
Global Shutter Image Sensors
Global shutter sensors have a fast and high-resolution capture of the entire field of view. Each pixel on a global shutter sensor completes its exposure simultaneously. This feature allows them to freeze motion in captured images. Each pixel will not only have the same integration time, but they will start their integration at the same time across the entire sensor. This exposure and detection scenario makes this type of sensor easier to synchronize with a flash or other external event.
-
product
Pregius Global Shutter CMOS USB 3.1 Gen 1 Camera
Lt1245R
The Lumenera Lt1245R uses the Sony Pregius® IMX253 sensor which is the largest of Sony’s global shutter CMOS sensors. With FPGA performance, onboard frame buffering, and Lumenera’s advanced image processing technology, the Lt1245R delivers high resolution images from a camera with a small form factor. This makes the Lt1245R ideally suited for machine vision, life sciences, UAV, and ATI applications.
-
product
Sensors
Expansive portfolio of CMOS & CCD image sensors, and imaging processors. Expansive portfolio of ambient light & proximity sensors, touch sensors, thermal sensors, and smart passive sensors. #1 Automotive Image Sensor supplier; #1 Security Image Sensor supplier..
-
product
CMOS Cameras
Magic series
New Imaging Technologies proposes a broad range of visible products. From sensors to complete camera systems, all of our products integrate our unique NATIVE WDR capabilities. Our NATIVE WDR™ is a new generation of CMOS imaging technology named MAGIC™ (standing in english for Active Matrix with indexed generated contrast ), capable of generating a highly stable image even under very wide intra scene dynamic range (> 120dB) in a single frame time and without multi-exposure, any setting of knee points or external control. Our products are suited for many demanding applications and industries.
-
product
PXIe-6537, 32-Channel, 50 MHz, 200 MB/s PXI Digital I/O Module
779989-01
32-Channel, 50 MHz, 200 MB/s PXI Digital I/O Module—The PXIe‑6537 can continuously stream data over the PXI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.
-
product
Machine Vision Lens
FUJINON HF6XA-5M
This new product, which has an external diameter of 39 mm and a focal length of 6 mm, is the world's smallest* Machine Vision lens which is used for industrial processes such as product inspection and measurement on production lines. HF6XA is a new lens which is designed for compatibility with 2/3" sensors with a pixel pitch of 3.45m (five megapixels). HF6XA is a FUJINON Machine Vision lens designed for compatibility with 2/3" sensors, which has coverage of approximately twice*** the current product, the FUJINON HF8XA, which offers the widest coverage range. In the frequently used environments of customers, the lens is compatible with the ultra-high resolution of 3.45m pixel pitch (equivalent to five megapixels when using a 2/3" sensor) under a large portion of the screen. Furthermore, for a wide range of installations and shooting conditions, the lens boasts "4D High Resolution"*4 performance, mitigating resolution degradation that typically occurs when changing a shooting distance or aperture value and maintaining a high level of even image sharpness across the entire image area at the ultra-high resolution of 4.4m pixel pitch (equivalent to three megapixels when using a 2/3" sensor). Despite being a wide-angle 6mm lens, the lens achieves the world's smallest external diameter of just 39 mm. The lens is ideal for attachment inside compact inspection devices with restricted internal space when wide coverage and consistency is required for reading product codes and serial numbers or for inspecting product shape and appearance.
-
product
Industrial Vision
Image processing is one of the most crucial and challenging sensor technologies of the future. Until recently, integrating vision sensors into practical applications was difficult and extremely expensive. Today, vision sensors can be implemented in a wide variety of industries and applications, offering cost advantages over standard solutions in difficult sensing environments.
-
product
Scientific CCD Image Sensors
Our front and backside illuminated (BSI) and backthinned Charge Coupled Devices (CCDs) are seen as the gold standard for scientific and quantum imaging in applications in spectroscopy, microscopy, In vivo, x-ray and astronomy. We understand that every imaging application is unique and requires our engineers and scientists to work closely with our customers providing highly tailored imaging solutions.
-
product
Camera Option for Nosecone Module
The Point Grey Grasshopper digital camera provides high resolution, high sensitivity sensors, yielding optimal imaging for underwater photography. Housed in the nosecone, the camera takes photos at a rate of up to 3.5 frames per second. Images are stored on a compact flash card and can be viewed through the Gavia Control Centre.
-
product
Hyperspectral Imaging Sensors
HYPERSPEC® sensors are line-scanning instruments (sometimes called pushbroom) that collect reflected light through an image slit. One row of spatial pixels is collected per frame as motion occurs, with each pixel containing full spectral data. Motion can be accomplished in two ways: either as an airborne deployment (UAV, aircraft, or satellite) or stationary (where motion is accomplished beneath the sensor, such as a food inspection line). A third option is also available where pan-and-tilt or rotary stages allow a fixed-location sensor to scan a stationary object (such as a piece of artwork, or a mine face for geological applications).
-
product
ISC-1781, 1.3 MP, 1.58 GHz Processor, Monochrome/Color Smart Camera
785145-01
The ISC‑1781 is a high-performance smart camera for machine vision and is powered by a 1.58 GHz dual-core Intel Celeron processor. The combination of the onboard processor with a CMOS image sensor provides an easily distributed all‑in‑one system. In addition to high-performance image acquisition and processing, you can use built-in digital I/O and industrial communication options for dynamic, real-time communication and integration with industrial automation devices including programmable logic controllers (PLCs), human machine interfaces (HMIs), robotics, sensors, and industrial machinery. You can configure NI Smart Cameras with the included Vision Builder for Automated Inspection (AI) software or program the camera with the LabVIEW Real‑Time Module and the Vision Development Module.
-
product
Light Metering System
Isolight
Peripheral Vision has developed the Isolight and Isolight Color light metering systems. The Isolight combines four photopic light sensors, a 100-LED chaser display, a flexible chart holding system, and multiple mounting options. The Isolight Color replaces the Isolight's luminance-only sensors with four full-color RGB sensors for measuring both illumination color and brightness. Both the Isolight and Isolight Color will greatly accelerate image quality testing and enhance the accuracy of your measurements.
-
product
Dual-USB3 Polarization Cameras
Celera P Series
Standard digital monochrome sensors capture light intensity and wavelength for each pixel: however, some applications require the inspection of polarized light to get relevant information.Instead of using external polarizing filters, Alkeria developed CELERA P, a new camera model featuring a special polarization image sensor.Thanks to its unique array of polarizer filters overlaid on top of the sensor's pixel array, CELERA P gets rid of all the external polarizing filters, combining the ease-of-use of the Alkeria USB3 cameras with the advanced capabilities of polarization imaging and unique FusionView feature.
-
product
Flat Panel Detectors
Are a class of solid-state x-ray digital radiography devices similar in principle to the image sensors used in digital photography and video.
-
product
Image Processing Module
IMP20
The IMP20 video processing mezzanine card significantly increases the ease of acquiring and interpreting images from multiple sensors and cameras, thus speeding reaction time and potentially saving lives. The card adds image fusion capabilities to Abaco Systems’ ADEPT104 and AIM12 automatic video trackers, and allows the design of highly integrated, high performance graphics capabilities in any environment where the input from multiple devices needs to be combined in order to provide a complete, easy-to-interpret image.
-
product
Image Sensors For Broadcasting And Digital Still Camera
Panasonic Industrial Devices Sales Company of America
Image Sensors For Broadcasting And Digital Still Camera
-
product
2D CMOS Image Sensors
Topaz
The Topaz series of industrial CMOS sensors include 2MP (1920 x 1080) and 1.5MP (1920 x 800) resolution devices. The sensors use state-of-the-art low noise, global-shutter pixel technology to offer powerful solutions and enable compact mobile designs for many applications.
-
product
Target simulators
Simat simulator is an advanced hardware simulator capable to simulate in infrared range several targets on quasi uniform background. In detail Simat simulator is a modular image projector capable to simulate in infrared range variable intensity, variable angular size, variable spectrum, spatially and temporally dynamic airborne type targets on quasi uniform background. Basically the aim of Simat to enable simulation typical airborne targets like aircrafts or helicopters for infrared imaging sensors used for surveillance of these targets. Optionally Simat can be modernized to enable simulation in both IR and UV/visible ranges as the projectors are built using broadband reflective optical elements.
-
product
CMOS Image Sensors
Since 1999 ST has been an industry leader in the design and manufacture of imaging sensors. The current product portfolio spans a wide range of traditional image sensors from entry level VGA to 24 Mpixels and will soon offer products with 100’s of millions of pixels.
-
product
X-RAY Cameras Based On CCD
XiRAY
*High resolution direct phosphor imaging, ideal for Micro CT*Ultra-low readout noise with CCD and especially the new sCMOS sensors*Crystal clear 14 bit/pixel images*Partial readout and binning modes for enhanced sensitivity and higher speed*Non-linearity over full dynamic range <2% (of full scale) to 95% of full scale*External triggering, LVTTL*Low power consumption 6 Watt with Cooling or 2W without*Antiblooming, Enhanced Statistical Extra-Mural Absorption*Radiation hardened, Support of Energy levels 7 to 100keV*Measures just 63 x 63 x 46 mm*Peltier TE Cooled with Heatsink and optional fan
-
product
Electron Multiplication (EM) Standard Image Sensors
EM (Electron Multiplication) is a technology that uses on-chip gain in the charge domain to effectively eliminate read noise from an image sensor. This enables advanced ultra-low light applications that require extreme sensitivity at fast frame rates. Examples include life science applications such as single molecule detection, super resolution microscopy and spinning disk confocal microscopy along with physical science applications such as nanotechnology imaging, Bose Einstein condensates and soft X-ray spectroscopy, and astronomy applications such as adaptive optics and lucky imaging. The inclusion of an additional conventional output allows further flexibility for applications such as true 24 hour surveillance.
-
product
Imaging
Teledyne e2v has over 40 years’ experience in designing, manufacturing and delivering imaging requirements, including CMOS (Complementary Metal Oxide Semiconductor), CCD (Charge Coupled Device) and EM (Electron Multiplying) image sensors, arrays, camera modules, subsystems and line scan cameras.
-
product
ISC-1783, 5 MP, 1.58 GHz Processor, Monochrome/Color Smart Camera
785154-01
The ISC‑1783 is a high-performance smart camera for machine vision and is powered by a 1.58 GHz dual-core Intel Celeron processor. The combination of the onboard processor with a CMOS image sensor provides an easily distributed all-in-one system. In addition to high-performance image acquisition and processing, you can use built-in digital I/O and industrial communication options for dynamic, real-time communication and integration with industrial automation devices including programmable logic controllers (PLCs), human machine interfaces (HMIs), robotics, sensors, and industrial machinery. You can configure NI Smart Cameras with the included Vision Builder for Automated Inspection (AI) software or program the camera with the LabVIEW Real‑Time Module and the Vision Development Module.
