Cable Assembly, Receiver, TriPaddle, 36", 37-Pin Female D-Sub
540016010201 - Virginia Panel Corporation (VPC)
Cable Assembly, Receiver, TriPaddle, 36", 37-Pin Female D-Sub
Cable Assembly
Subcomponents
Receiver Positions: Quantity: 1 Connector: TriPaddle, Connector Positions: 64
D-SUB (Female): Quantity: 1 Connector Positions: 37
-
product
PXI-6238, 8 AI (16-Bit, 250 kS/s), 2 AO, 6 DI, 4 Sourcing DO, Bank-Isolated, PXI Hybrid, Multifunction I/O
779624-01
8 AI (16-Bit, 250 kS/s), 2 AO, 6 DI, 4 Sourcing DO, Bank-Isolated, PXI Multifunction I/O Module—The PXI‑6238 is a bank-isolated DAQ device designed for current I/O. It offers analog I/O, digital input, sourcing digital output, two 32‑bit counters, and digital triggering. The digital input and outputs are compatible with 24 V signals. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control. The PXI‑6238 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PXI‑6238 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.
-
product
Cable Assembly, Receiver, TriPaddle, 20", 37-Pin Female D-Sub
540016010101
Cable Assembly, Receiver, TriPaddle, 20", 37-Pin Female D-Sub
-
product
Cable Assembly, Receiver, TriPaddle, 48", 37-Pin Female D-Sub
540016010601
Cable Assembly PXI / VXI 6 BNC 48"
-
product
PXI-6521, 16-Channel, ±30 VDC, 8 Sink/Source Inputs, 8 Relay Outputs, Isolated PXI Digital I/O Module
779313-01
16-Channel, ±30 VDC, 8 Sink/Source Inputs, 8 Relay Outputs, Isolated PXI Digital I/O Module—The PXI‑6521 is an industrial digital I/O module with high channel isolation and industry-standard 24 V logic levels. For added safety, the PXI‑6521 requires a keyed connector. If a computer or application fault occurs, the PXI‑6521 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. It also features programmable power-up states, digital filtering, and change detection for optimal control over your application.
-
product
PXI High Voltage Power Multiplexer, Quad 6:1
40-331A-003
The 40-331A-003 quad 6:1 MUX is part of our range of 40-331A/332 High Voltage Power Multiplexer and Matrix Modules and is suitable for applications requiring high voltage power relay switching with high density. They feature current handling up to 5A, 1000VDC/1000VAC peak cold switching and 110VDC/250VAC hot switching.
-
product
16 Channel Power PXI Multiplexer, 2 Pole
40-650-002
A 16 Channel Power Multiplexer, suitable for switching inductive/ capacitive loads up to 5A at 250VAC. Power multiplexer modules are intended for switching heavy AC or DC loads or for slaving up to large external relays, contactors and solenoids. It is suitable for applications requiring switching of either mains voltage or DC.
-
product
PXI 10x8 Power Matrix 2A 1 Pole
40-547-001
Model 40-547-001 is a high density single 1-pole 10x8 power matrix module. It is also available in dual 10x4, dual 10x4 or single 20x4 relay formats: Typical applications include power routing in Functional ATE systems, specifically automotive electronics, for example testing of Engine Management Units.
-
product
PXI 10x4 Matrix 2A 1 Pole
40-545-001
The 40-545 series of modules are high density power switching matrices. Typicalapplications include power routing in Functional ATE systems, specifically automotiveelectronics, for example testing of Engine Management Units.
-
product
PXI 20x4 Power Matrix 2A 1Pole
40-548-001
Model 40-548-001 is a high density single 1-pole 20x4 power matrix module. It is also available in single 10x4, dual 10x4 or single 10x8 relay formats: Typical applications include power routing in Functional ATE systems, specifically automotive electronics, for example testing of Engine Management Units.
-
product
PXI 32 Channel Switch Simulation Module
40-480-221
The 40-480 is designed to simulate the operation of automotive switches where dirty contacts or leaking current can be expected from switch contamination. It allows automotive I/O devices to be tested for correct operation under adverse conditions. The design includes protection circuits that ensure module damage cannot be caused by wiring faults or UUT failures. Each module can support up to 32 channels and is suitable for both 12V and 24V automotive applications.
-
product
PXI-6233, 16 AI (16-Bit, 250 kS/s), 2 AO, 6 DI, 4 Sinking DO, Bank-Isolated, PXI Multifunction I/O Module
779620-01
16 AI (16-Bit, 250 kS/s), 2 AO, 6 DI, 4 Sinking DO, Bank-Isolated, PXI Multifunction I/O Module—The PXI‑6233 is a bank-isolated DAQ device designed for voltage I/O. It offers analog I/O, digital input, sinking digital output, two 32‑bit counters, and digital triggering. The digital input and outputs are compatible with 24 V signals. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control. The PXI‑6233 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PXI‑6233 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.
-
product
PXI-6230, 8 AI (16-Bit, 250 kS/s), 4 AO, 6 DI, 4 DO, Bank-Isolated, PXI Hybrid, Multifunction I/O
779616-01
8 AI (16-Bit, 250 kS/s), 4 AO, 6 DI, 4 DO, Bank-Isolated, PXI Multifunction I/O Module—The PXI‑6230 is a bank-isolated DAQ device designed for voltage I/O. It offers analog I/O, digital input, digital output, two 32‑bit counters, and digital triggering. The digital input and outputs are compatible with 5 V TTL/CMOS signals. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control. The PXI‑6230 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PXI‑6230 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.
Solutions that include this product:
- Test 2 (Testing Builder)
Also found in Solutions brought to you by our partner VPC CSS
- PXI-6521 / 779313-01 - NI PXI Digital I/O - 36" VPC Cable Assembly - TriPaddle 64 (Digital I/O Cable Assembly Solution)
- 40-480-221 - Pickering PXI Digital I/O - 36" VPC Cable Assembly - TriPaddle 64 (Digital I/O Cable Assembly Solution)
- 40-547-001 - Pickering PXI Matrix, 10x8 - 36" VPC Cable Assembly - TriPaddle 64 (Matrix Cable Assembly Solution)
- 40-548-001 - Pickering PXI Matrix, 20x4 - 36" VPC Cable Assembly - TriPaddle 64 (Matrix Cable Assembly Solution)
- 40-546-001 - PXI Matrix, 10x4 - 36" VPC Cable Assembly - TriPaddle 64 (Matrix Cable Assembly Solution)
- 40-545-001 - Pickering PXI Matrix, 10x4 - 36" VPC Cable Assembly - TriPaddle 64 (Matrix Cable Assembly Solution)
- 40-331A-003 - Pickering PXI Multiplexer - 36" VPC Cable Assembly - TriPaddle 64 (Multiplexer Cable Assembly Solution)
- 40-650-002 - Pickering PXI Multiplexer - 36" VPC Cable Assembly - TriPaddle 64 (Multiplexer Cable Assembly Solution)
- PXI-6230 / 779616-01 - NI PXI Multifunction I/O - 36" VPC Cable Assembly - TriPaddle 64 (Multifunction I/O Cable Assembly Solution)
- PXI-6233 / 779620-01 - NI PXI Multifunction I/O - 36" VPC Cable Assembly - TriPaddle 64 (Multifunction I/O Cable Assembly Solution)
- PXI-6238 / 779624-01 - NI PXI Multifunction I/O - 36" VPC Cable Assembly - TriPaddle 64 (Multifunction I/O Cable Assembly Solution)
- 40-295-021-3/24 - Pickering PXI Resistor Module - 36" VPC Cable Assembly - TriPaddle 64 (Resistor Module Cable Assembly Solution)
